Handheld dry drilling · Current DE-04B / DE23132 specification
DE04B handheld dry-coring system
Dekola’s brushless handheld dry-coring system, with a published 230 V/50 Hz, 1500 W specification, two speed/impact figures and a described 38 L extraction package. The quoted configuration and tool connections need confirmation together.
Match the quoted drill to DE23132
The parameter tab identifies a specific electrical version.
| Official parameter | Published value | Purchase interpretation |
|---|---|---|
| Model / item | DE-04B / DE23132 | Match these to the returned specification and supplied identification. |
| Rated supply / input | 230 V / 50 Hz; 1500 W | Input power is not a measured mechanical output. A different electrical version needs its own sheet. |
| No-load rotational speeds | 1500 / 3000 rpm | No-load values, not cutting speed under load or a production-rate guarantee. |
| No-load impact rates | 24,000 / 48,000 bpm | Impact figures are separate from spindle rotation. Confirm mode/tool applicability in the manual. |
| Maximum hole diameter | 132 mm | The description calls this a handheld maximum; obtain applicable material/depth/mode conditions. |
| Head/drill net mass | 3.7 kg | Does not include the entire vacuum, hose, tools or shipping pack. |
| Spindle thread notation | M18 | No pitch is supplied in this table. Obtain the controlled connection specification. |
These figures were read directly from the model’s parameter tab. [1] The description adds brushless operation, two modes with micro-impact, soft start and a mechanical slip clutch. Those are supplier feature statements; no CivilEquip kickback, durability or drilling test is claimed.
Separate the drill limit from included tools
The stated maximum is not the size of each supplied bit.
Website-described standard set
- Vacuum adaptor marked “M18-1-1/4UNC”.
- Listed 52, 63 and 83 mm hammer-type drilling bits.
- 38 L multifunction wet/dry vacuum, described with HEPA filtration, one-button start and automatic dust shaking.
The source describes these as standard. Confirm the actual itemised scope and destination configuration on the quote. [1]
Connection and revision checks
Ask for the adaptor’s controlled thread drawing, bit connection and mode instructions. Do not infer an M18 pitch or silently convert the written adaptor notation. A compatible-looking photo does not establish a matched connection.
A 132 mm maximum does not imply a 132 mm bit is included: the listed standard diameters are 52/63/83 mm. If your hole needs another diameter or depth, require the exact tool reference and supported operating conditions.
No stand is identified in the DE04B described set. The manufacturer separately lists DE08B+DS-10 and DE10B+DS-10. [2] Do not transfer those stands into this handheld offer without an approved combination.
Define dry drilling as a complete site task
Dekola describes DE04B for domestic renovation and says its dry-drilling package can cut reinforced concrete without water. [1] That is a supplier application claim, not a verified result for every reinforcement pattern, hole depth or operating orientation.
- Hole and materialGive diameter, depth, drilling direction, concrete/reinforcement information and hole count. Ask the supplier to identify the matched bit and permitted mode.
- Power and handlingMatch the published 230 V/50 Hz version to site supply and obtain the electrical/manual requirements. Assess the whole assembly and access, not only the 3.7 kg head.
- Extraction and work environmentIdentify the extractor and hose/interface arrangement for the job. The manufacturer’s HEPA description alone does not establish task exposure or a complete dust-control assessment.
HSE’s CN3 guidance addresses hand-held drilling/coring with respiratory protection alongside extraction and/or water suppression. [3] The responsible site assessor must select and review appropriate controls for the actual task. This page does not certify the supplied vacuum or provide a site-specific safe operating procedure.
Approve the system documents with the order
Request the current DE23132 datasheet/manual, exact vacuum specification, matched tool references and connection drawings. Ask for the permitted diameter/depth/material conditions and maintenance/consumable instructions. If an export, dealer or alternate-voltage set differs from the website, record the differences before price approval.
The image currently stored in this directory is a historical manufacturer catalogue image. It is not proof that the current drill/accessory revision looks identical. Require supplied identification, item list, inspection/acceptance scope, destination documents and shipping mass/dimensions for the actual package.
Does 1500 W establish drilling productivity?
It is published input power. No cutting-time, feed-rate or production-rate test is established here. Request a supported application response for the actual hole and tool.
Is the vacuum’s 38 L volume a dust-control performance rating?
No. Container volume is distinct from airflow, filtration/system classification and task exposure. Obtain the extractor specification and a competent site assessment.
Request the drill, tools and extraction together
Sources & review
- DE04B description and parameter tab ↗
Current text and clicked parameter tab: DE-04B/DE23132, supply/input power, no-load figures, diameter, head mass and spindle. Also described vacuum, adaptor and bit package. Manufacturer claims, not CivilEquip tests.
2026-10-11 - Dekola drill and stand-combination list ↗
Separate DS-10 combination names; no stand assumed included with DE04B.
2026-10-11 - HSE construction-silica guidance, CN3 ↗
Task-specific drilling/coring guidance links extraction/water suppression with respiratory protection. Does not assess or certify this product.
2026-10-11
Specifications come from the manufacturer’s published information and the sources above; buying advice is written by CivilEquip with AI assistance. Ask the manufacturer to confirm the data for your configuration. Editorial policy · Report a correction.