Handheld drill, stand combination or tooling?
Order an assembly with a defined supplied scope.
Dekola’s introduction describes design, manufacture and processing of diamond core drills, matching stands and drilling bits. The model list distinguishes DE04B, DE05B, DE-06D and DE-06P from explicitly named DE08B+DS-10 and DE10B+DS-10 combinations. [1] [2]
Handheld system
The current DE04B entry specifically describes handheld dry drilling. Match drill, bit and extraction package to the intended hole and material. A stand is not identified as part of that DE04B package.
Drill and stand combination
Where the catalogue includes DS-10 in the name, ask for the exact compatible drill, stand, support/fixing arrangement and supplied accessories. The combined name is a useful lead, not a complete itemised specification.
Diamond tool or accessory
Identify required diameter, length, material/application and mechanical connection. A supplier’s drill range does not guarantee that any selected bit fits each drill or suits the same mode.
Neither neighbouring model numbers nor a photograph supplies a diameter rating. Ask for the sheet applicable to the specific combination, especially when the supplier proposes an alternative to your initial request.
The current DE04B offer contains real detail
The earlier incomplete-catalogue assessment has been superseded.
The current model page describes a brushless handheld system for domestic home-renovation work, dry drilling with a vacuum quick connection, two modes with micro-impact, soft start and a mechanical slip clutch. It publishes a maximum handheld hole diameter of 132 mm and drill net mass of 3.7 kg. [3] These are manufacturer statements, not a demonstration on your concrete.
Stated supplied package
- Vacuum
- 38 L wet/dry unit
- Adaptor notation
- M18-1-1/4UNC
- Listed bit diameters
- 52 / 63 / 83 mm
The page also describes HEPA filtration, one-button start and automatic dust shaking. Confirm the actual vacuum, connections and consumables supplied.
Keep maxima and included sizes apart
The stated 132 mm handheld maximum is not an included 132 mm bit. The listed standard bit sizes are smaller. The 3.7 kg figure belongs to the drill, not the combined vacuum/accessory package or shipment.
The parameter tab identifies DE-04B / item DE23132, rated 230 V/50 Hz and 1500 W input. It lists 1500/3000 rpm no-load rotation, 24,000/48,000 bpm no-load impact and an M18 spindle. Keep the input-power and no-load qualifications; they do not establish drilling output. Obtain permitted modes and the controlled connection drawing for the quote. The adaptor string is reproduced as the supplier’s notation, not silently converted into a different thread designation. The product guide provides a package comparison and missing-data enquiry.
Let the hole and site conditions drive selection
Hole definition
Give diameter, depth, direction, concrete/reinforcement information and number of holes. Ask the supplier which model, mode and matched tool it proposes, with the applicable operating instructions.
Site definition
Describe electrical supply, occupied/enclosed surroundings, access and the intended support/extraction arrangement. Resolve the complete system and site controls before purchase.
HSE’s construction-silica guidance specifically includes hand-held drilling and coring, addressing respiratory protection alongside extraction and/or water suppression. [4] A manufacturer’s HEPA filter description alone does not establish dust-control suitability or safe exposure on the buyer’s site. Have the responsible site assessor review the task and selected system; no on-site exposure result is claimed here.
This directory does not prescribe anchoring or operating steps. Obtain the manual and permitted combination from the supplier, and keep drill/support/tool and site responsibilities explicit.
Qualify the quoted configuration
The company states establishment in 2018 and a Hangzhou location. Its European design/manufacturing-experience language does not prove European manufacture, a local service network or a conformity approval. [1] No independent factory visit, current certificate verification or drill test is established by CivilEquip.
Request the legal supplier, machine/document holder, current manual, configuration identifier, warranty/repair route and spare/consumable references. Itemise the drill, extractor, bits and adaptors on the same quote. If a dealer or export package differs from the domestic website offer, require a clear difference schedule rather than assuming the pictured standard set carries over.
Ask for a matched coring package
Sources for this company
- Dekola company introduction
Supplier statement of 2018 establishment in Hangzhou and drill/stand/bit design and manufacture. European design wording is not European manufacturing or certification evidence.
Checked: 2026-10-11 - Concrete-drill model list
DE04B and separate drill/DS-10 combination labels; no stand inclusion inferred for other models.
Checked: 2026-10-11 - Current DE04B system description
Brushless handheld dry-drilling description, 132 mm handheld maximum, 3.7 kg drill net mass, 38 L vacuum and listed accessories/features. Supplier claims, not CivilEquip performance tests.
Checked: 2026-10-11 - HSE construction-silica guidance — CN3 hand-held drilling/coring
Independent task guidance links extraction/water suppression and respiratory protection. Not a Dekola equipment approval or complete site assessment.
Checked: 2026-10-11