Choose the project scope before choosing a box
衢州海西电子科技有限公司 describes development and integration for construction machinery, especially mining/rock-drilling equipment. Its company page also names core components and agency supply of imported mechanical, electronic and software products. [1] Confirm who makes each offered item and which work Hixee performs.
Electrification
Power topology, selected HV components, control interfaces and harness integration for the actual machine.
Drilling automation
Planning/control software, machine I/O, positioning and sensor/actuator integration for defined drilling functions.
Component supply
An exact controller, distribution unit or other component with its hardware/software revision and responsibility boundary.
Electrifying the drive does not itself deliver automated drilling. Combining both programmes requires an agreed common architecture and machine-level acceptance.
Battery travel and grid-connected work are distinct states
The system page describes battery-only travel and working operation using battery or external grid, with grid power able to supply the machine and charge the onboard battery. It offers scheme design, component selection/integration, high-/low-voltage harness work and installation/testing. [2] These are architecture descriptions, not current ratings or proof of every underground application’s approval.
| Subsystem in the offer | Project question to settle |
|---|---|
| PACK and power sources | Voltage/energy, duty, charging and battery/grid state transitions |
| PDU | Distribution/protection and which DCDC or battery-management functions are actually integrated |
| MCU and motor | Hardware envelope, cooling, enabled modes and VCU command/feedback interface |
| OBC / DCDC / harnesses | Selected identities, electrical/connector drawings, installation and service boundary |
The PDU page explicitly makes integration dependent on the machine architecture. [4] Do not assume every PDU includes DCDC/BMS or that a controller photograph fixes voltage, current or connector allocation.
The surface-drill offer has a defined data and control chain
- 1
Design a hole layout
ADS Plan Surface is described as preparing positions, angles, diameters and depths and transferring the layout by USB or network.
- 2
Execute machine functions
ADS Drill Surface, onboard computer and PLC are described as coordinating positioning, boom movement, drilling and travel through machine controls.
- 3
Return drilling records
The source describes measurement-while-drilling/completed-hole reports and analysis. Define the actual exported fields, quality and acceptance for the proposed machine.
The surface page also names RTK positioning, LiDAR, joint/tilt/process sensors and hydraulic valves. [5] Its efficiency, precision and safety claims are not independently quantified here. Obtain the configuration’s demonstrated functions, operating envelope, supervision/fallback and trial records; component names alone do not prove unattended operation.
Keep interfaces, software and validation in the delivery package
- Architecture record
- Machine state/function scope, component identities and hardware/software revisions
- Integration record
- Power/circuit, harness/connectors, network signals, I/O and fault response responsibilities
- Acceptance record
- Bench/interface and machine tests with conditions/results, instructions, diagnostics and supported configuration
For an earth-moving-machine project, a competent assessment may consider applicable functional-safety standards. The current ISO 19014-1:2026 publisher abstract is about safety-related control performance, excludes equipment-origin electrical shock/fire and excludes machines made before its publication. [6] It is not a blanket retrofit requirement or evidence of Hixee certification. Agree the actual machine’s applicable requirements and separate electrical, functional-control and site/environment validation.
No factory visit, measured energy saving, verified customer project, authenticated current certificate or machine accuracy guarantee is assigned by CivilEquip. Ask for project-specific evidence and define support, access permissions and configuration-change approval in the offer.
Prepare a machine integration brief
Sources for this company
- Hixee company introduction
Quzhou entity and declared electronics/mechanical/hydraulic, development/integration and imported-product agency roles. No verified brand authorization or installation history.
Checked: 2026-10-11 - Electrification system solution
Design/selection/harness/installation-testing offer and battery/grid operating descriptions; no project ratings, machine approval or measured savings.
Checked: 2026-10-11 - MCU motor-controller description
Speed/torque/mixed modes, VCU inputs and three controller categories; no order-specific electrical/control interface sheet.
Checked: 2026-10-11 - PDU distribution architecture
Machine-specific HV distribution; optional DCDC/partial battery-management integration, not universal inclusion.
Checked: 2026-10-11 - Surface-drill automation architecture
ADS Plan/ADS Drill, computer/PLC, positioning/sensors/control descriptions; not measured accuracy or independently proven autonomous operation.
Checked: 2026-10-11 - ISO 19014-1:2026 publisher abstract
Safety-related earth-moving control performance methodology; excludes equipment-origin electric shock/fire and does not apply to machines manufactured before publication. Not blanket project compliance.
Checked: 2026-10-11